48W IP65 3500lm LED Flood Light

48W LED Flood Light - LED Flood Light - by www.lednxt.com

LED Flood Light - LN-48W-FL

48W IP65 3500lm LED Flood Light

With a slim & simple design, the 48W LED NXT Flood Light is 92% more efficient than comparable 600W HID Lamps. Maintenance free operation lasts up to 16 times longer than HID lighting.

Reliably produces clear, bright illumination that reduces operational and maintenance costs!

Cautions

Turn power off before inspection, installation, or removal
For use outdoors IP65.
Do not open – no user serviceable parts inside.
This device is not intended for use with emergency exit fixtures or emergency exit lights.

Technical
Beam Angle	17/33/45/25*58
Brightness (lm)	3500lm
CCT	W.W: 3000K; C.W:6000K; N.W:4000K; RGB
Color Rendering Index (CRI)	>80
Design Criteria	Rating is based on open-air fixture application
Driver Specification	HW0481500X
Flux in 90° (if directional):	2900
Flux Total	2900
Frequency	50/60Hz (47-65Hz)
Input / Output	Input:110-260VAC; Output: 48W 1500MA
LED Brand	CREE
Lifetime (h)	50000
Material	Aluminium
Number of LEDs	27
Power Consumption	48W
Power Factor	>0.9
SDCM	<6
Size	Length : 8.6” (220mm), Height : 13.5” (344mm), Width : 2.7” (70mm)
Type	LED 48W Flood Light
Voltage	110 - 240V
Wattage Equivalent	Up to 600W (HID)
Weight	7.9lb (3.6Kg)

Building
Parking Lot/Garage
Gas Station
Park
Street light
Warehouse
Stadium

✓ Slim & Simple Design
✓ Open Rated for Maximum Air Flow
✓ Working Temperature: -30˚C to +60˚C (-22˚F to 140˚F)
✓ Operating Humidity: 0% to 95% RH
✓ IP Rating: IP65
✓ Adjustable in 90 degrees in both directions
✓ Available in 25W, 48W, 70W and 113W
✓ Can replace from 400W to 1000W HID Lamps
✓ Can be positioned with multiple bracket mounts
✓ More than 8 years without maintenance (12h/d, 6 days/7)
✓ 5-Year Warranty
✓ Must be Installed by a Licensed Electrician

Heat sources like transformer and FET of the SMPS are designed with heat dissipating mechanical structure to keep the temperature difference(ΔT) between inside lead and outside temperature not more than 86°F(30°C).

Junction temperature of LED light source is kept below 149°F (65°C). (Theoretically, in order for LED to get life span over 50,000 hours the junction temperature should be below 176°F (80°C)

Print PDF